Search DAE:
A+  A  A- 
Header Image
LBAID   | LMDDD   |  SSLD   |  LMPD   |  LESD   |  LPD   |  CD   |  LSES    | LPAS    |  MOSS

Journal Publications of Laser Material Processing Division (2002 onwards)

2010

  1. Misra P., Das A. K., Kukreja L. M., Switching characteristics of ZnO based transparent resistive random access memory devices grown by pulsed laser deposition, Physica Status Solidi (In press).
  2. Kukreja L. M., Chaturvedi A., Singh B. N., Detty A. P., Pillai V. P. M., Sartor J., Kalt H., Klingshirn C., Studies on UV photoluminescence from pulsed laser deposited ensembles of capped silicon nanoparticles, Int. J. Nanoscience (In press).
  3. P. Ganesh, Moitra A., Tiwari P., Sathyanarayanan S., Kumar H., Rai S. K., Kaul R., Paul C. P., Prasad R. C., L.M Kukreja, Fracture behavior of laser clad joint of Stellite 21 on AISI 316L stainless steel, Materials Science & Engineering A (In press).
  4. Chatterjee S., Ganesh P., Palai R., Wu J. A., Kaul R., Majumdar J. D., Roy Choudhury A., Effect of h-BN addition on the tribological behavior of nanostructured Al2O3-TiB2-TiN based coatings developed by combined SHS and laser surface alloying, Surface and Coatings Technology, 204(11), 2010, 1702-1709
  5. Ajimsha R. S., Das A. K., Singh B. N., Misra P., Kukreja L. M., Structural, electrical and optical properties of Dy doped ZnO thin films grown by buffer assisted pulsed laser deposition, Physica E, 42, 2010, 1838-1843.

2009

  1. Kaul R., Parvathavarthini N., Ganesh P., Mulki S. V., Samajdar I., R. K. Dayal R. K., Kukreja L. M., A novel pre-weld laser surface treatment for enhanced inter-granular corrosion resistance of austenitic stainless steel weldment, Welding Journal, 88 (12),  2009, 233s -242s.
  2. Rao B. T., Ittoop M. O., Kukreja L.M., A Power ramped pulsed mode Laser piercing technique for improved CO2 laser cutting, Optics and Lasers in Engineering, 47(11), 2009, 1108-1116.
  3. Masanta M., Ganesh P., Kaul R., Nath A. K., Roy Choudhary A., Development of a Hard Nano-Structured Multi-component Ceramic Coating by Laser Cladding, Materials Science & Engineering A, 508, 2009, 134-140.
  4. Majumdar J. D., Manna I., Kumar A., Bhargava P., Nath A. K., Direct laser cladding of Co on Ti-6Al-4V with a compositionally graded interface, Journal of Material Processing Technology, 209, 2009, 2237-2243.
  5. Das A. K., Misra P., Kukreja L. M., Effect of Si doping on electrical and optical properties of ZnO thin films grown by sequential pulsed laser deposition, J. Phys. D: Appl. Phys, 42, 2009, 165405.
  6. Late D. J., Misra P., Singh B. N., Kukreja L. M., Joag D. S., More M. A., Enhanced Field Emission of Pulsed laser deposited nanocrystalline ZnO thin films on Re and W, Appl. Phy. - A, 95, 2009, 613-620.
  7. Desale G. R., Paul C. P., Gandhi B. K., Jain S. C., Erosion wear behavior of laser clad surfaces of low carbon austenitic steel, Wear, 266(9-10), 2009, 975-987.
  8. Kailath B. J., Dasgupta A., Dasgupta N., Singh B. N., Kukreja L. M., Growth of ultra-thin SiO2 by laser-induced oxidation, Semiconductor Science & Technology, 24, 2009, 105011.
  9. Ganesh P., Kaul R., Mishra S. K., Bhargava P., Paul C. P., Singh C. H., Tiwari P., Oak S.M., Prasad R. C., Laser rapid manufacturing of bi-metallic tube with Stellite-21 and austenitic stainless steel, Transactions of Indian Institute of Metals, 62(2), 2009, 169-174.
  10. Kukreja L.M., Misra P., J. Fallert, J. Sartor, H. Kalt, C. Klingshirn, Nano - ZnO in photonics landscape, IEEE Photonics Global, 2009, 1-6.
  11. M. Alimardani, E. Toyserkani, J. P. Huissoon, Paul C. P., On the delamination and crack formation in a thin wall fabricated using laser solid freeform fabrication process: An experimental–numerical investigation, Optics and Lasers in Engineering, 47, 2009, 1160-1168.
  12. Ingale A. A., Mishra S., Roy U. N., Tiwari P., Kukreja L. M., Structural and particulate to bulk phase transformations of CdS films on annealing, Journal Applied Physics, 106, 2009, 084315.
  13. Kukreja L. M., Das A. K., Misra P., Studies on nonvolatile resistance memory switching in ZnO Thin Films, Bull. Mater. Sci., 32(3), 2009, 247-252.
  14. Misra P., Sharma T. K., Kukreja L. M., Temperature Dependent Photoluminescence Processes in ZnO Thin Films Grown on Sapphire by Pulsed laser Deposition, Current Applied Physics, 9(1), 2009, 179-183.
  15. Ingale A. A., Mishra S., Roy U. N., Tiwari P., Kukreja L. M., Structural and particulate to bulk phase transformation of CdS film on annealing: A Raman spectroscopy study, Journal of Applied Physics, 106, 2009, 084315.

2008

  1. Kumar S., Roy S., Paul C.P., Nath A. K., A Three Dimensional Conduction Heat Transfer Model for Laser Cladding Process, Numerical Heat Transfer, Part B: Fundamentals, 53(3), 2008, 271-287.
  2. Paul C. P., Khajepour A., Automated Laser Fabrication of WC-Co Components, Optics & Laser Technology, 40(5), 2008, 735-741.
  3. Sheth S. S., Jana D., Joshi O. P., Oak S. M., DSP-based Motion Control System, Journal of the Instrument Society of India, 38(2), 2008, 137-144.
  4. Kukreja L.M., Koslowski B., Steiner R., Plettl A., Ziemann P., Direct observation of slow morphological transformations and wettnig behavior of pulsed laser deposited sub-monolayer gold on (0001) sapphire in atmosphere, Applied Surface Science, 254, 2008, 7336-7341.
  5. Irimpan L., Deepthy A., Krishnan B., Kukreja L. M., Nampoori V. P. N., Radhakrishnan P., Effect of self-assembly on the nonlinear optical characteristics of ZnO thin films, Optics Communications, 281, 2008, 2938-2943.
  6. Ajimsha R. S., Jayaraj M. K., Kukreja L. M., Electrical characteristics of n-ZnO/p-Si heterojunction diodes grown by pulsed laser deposition at different oxygen pressures, Journal of Electronic Materials, 35, 2008, 770-775.
  7. Late D. J., Kate K. S., More M. A., Misra P., Singh B. N., Kukreja L. M., Enhanced field emission from LaB6 thin films with nano-protrusions grown by pulsed laser deposition on Zr foil, Applied Surface Science, 254(11), 2008, 3601-3605.
  8. Thota S., Kukreja L. M., Kumar J., Ferromagnetic ordering in pulsed laser deposited Zn1−;;xNixO/ZnO bilayer thin films, Thin Solid Films, 517, 2008, 750-754.
  9. Kaul R., Mahajan S., Kain V., Ganesh P., Chandra K., Nath A. K., Prasad R. C., Laser Surface Treatment for Enhancing Intergranular Corrosion Resistance of AISI Type 304 Stainless Steel, Corrosion, 64(10), 2008, 755-763.
  10. Parvathavarthini N., Dayal R. K., Kaul R., Ganesh P., Khare J., Nath A. K., Mishra S. K., Samajdar I., Novel Laser Surface Treatment Approach to Suppress Sensitization in Modified Type 316(N) Stainless Steel Weld Metal, Science and Technology of Welding and Joining, 13(4), 2008, 335-343.
  11. Late D. J., Date K. S., More M. A., Misra P., Singh B. N., Kukreja L. M., Dharmadhikari C. V., Joag D. S., Some aspects of pulsed laser deposited nanocrystalline LaB6 film: Atomic force microscopy, constant force current imaging and field emission investigations, Nanotechnology, 19, 2008, 265605.
  12. Gupta D., Paul C. P., Gandhi B. K., Gupta S. R., Nath A. K., Wear behavior of laser clad surfaces of Cr3C2, WC and Mo on austenitic AISI 304L steel, Journal of Laser Applications, 20, 2008, 140-145.

2007

  1. Paul C. P., Alemohammad H., Toyserkani E., Khajepour A., Corbin S., Cladding of WC-12Co on low carbon steel using a pulsed Nd:YAG laser, Materials Science and Engineering-A , 464(2), 2007, 170-176.
  2. Markna J. H., Parmar R. N., Rana D. S., Kumar R., Misra P., Kukreja L. M., Kuberkar D. G., Malik S. K., Effects of swift heavy ions irradiation on La0.5Pr0.2Sr0.3MnO3 epitaxial thin films grown by pulsed laser deposition, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 256(2), 2007, 693,.
  3. Markna J. H., Parmar R. N., Vachhani P. S., Kuberkar D. G., Misra P., Singh B. N., Kukreja L. M., Enhancement of electronic transport and magneto-resistance of Al2O3 impregnated, Europhysics Letters, 79(1-5), 2007, 17005.
  4. Alemohammad H., Toyserkan E., Paul C. P., Fabrication of smart cutting tools with embedded optical fibre sensors using combined laser solid freeform fabrication and moulding techniques, Optics and Lasers in Engineering, 45(10), 2007, 1010-1017.
  5. Late D. J., More M. A., Misra P., Singh B. N., Kukreja L. M., Joag D. S., Field Emission from nanocrystalline LaB6 prepared by laser ablation, Ultramicroscopy, 107, 2007, 825.
  6. Viswanathana A., Sastikumara D., Rajarajana P., Kumar H., Nath A. K., Laser irradiation of AISI 316L stainless steel coated with Si3N4 and Ti, Optics & Laser Technology, 39, 2007, 1504-1513.
  7. Soni R.K., Mandloi V., Pote M.B., Nath A. K., Spinning cone water film power meter for high-power CO2 lasers, Optics & Laser Technology, Vol. 39, p. 196-201, 2007.
  8. Panda S. K., Kumara D. R., Kumar H., Nath A. K., Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming, Journal of Materials Processing Technology, 183, 2007, 321-332.
  9. Rao R.V.S., Parvathavarthini N., Pujar M.G., Dayal R.K., Khatak H.S., Kaul R., Ganesh P., Nath A. K., Improved pitting corrosion resistance of cold worked and thermally aged aisi type 316l(n) ss by laser surface modification, Surface Engineering, 23(2), 2007, 83-92.
  10. Paul C. P., Ganesh P., Mishra S. K., Bhargava P., Negi J., Nath A. K., Investigating laser rapid manufacturing for inconel-625 components, Optics and Laser Technology, 39, 2007, 800-805.
  11. Khare J., Kaul R., Ganesh P., Kumar H., Jagdheesh R., Nath A. K., Laser beam shaping for microstructural control during laser surface melting, Journal of Laser Applications, 19, 2007, 1-7.
  12. Chandrasekar P., Balusamy V., Chandranb K. S. Ravi, Kumar H., Laser surface hardening of titanium-titanium boride (Ti-TiB) metal matrix composite, Scripta Materialia, 56, 2007, 641-644.
  13. Sharma V. K., Chattopadhyay M. K., Kumar R., Ganguli T., Kaul R., Majumdar S., Roy S. B., Magnetic and calorimetric investigations of ferromagnetic shape memory alloy Ni54Fe19Ga27, Journal of Physics D: Applied Physics, 40, 2007, 3292.
  14. Kumar M., Khare J., Nath A. K., Numerical solution of Boltzmann transport equation for TEA CO2 laser having nitrogen-lean gas mixtures to predict laser characteristics and gas lifetime, Optics and Laser Technology, 39(1), 2007, 86-93.
  15. Misra P., Sharma T. K., Kukreja L. M., Temperature dependent photoluminescence from ultra-thin zno quantum wells grown on (0001) sapphire using buffer assisted pulsed laser deposition, Superlattices and Microstructures, 42, 2007, 212.
  16. Kumar M., Khare J., Gupta C., Nath A. K., Theoretical and experimental study of V-I characteristics of UV pre-ionized TEA CO2 laser for variety of laser gas mixtures,
    Optics and Laser Technology, 39(1), 2007, 129-135.
  17. Viswanathan A., Sastikumar D., Kamachimudali U., Kumar H., TiC reinforced composite layer formation on Al-Si alloy by laser processing, Surface Engineering, 23(2), 2007, 123-128.
  18. Ajimsha R. S., Vanaja K.A., Jayaraj M. K., Misra P., Dixit V. K., Kukreja L. M., Transparent p-AgCoO2/n-ZnO diode heterojunction fabricated by pulsed laser deposition, Thin Solid Films, 515, 2007, 7352.
  19. Adhi K. P., Harchirkar S., Jejurikar S. M., Koinkar P. M., More M. A., Joag D. S., Kukreja L. M., Pulsed laser deposited nanostructured inn thin films as field emitters, Solid State Communications, 142, 2007, 110 – 113.
  20. Jejurikar S. M., Banpurkar A. G., Bankar D. N., Adhi K. P., Kukreja L. M., Sathe V. G., Growth temperature and N2 ambient pressure dependent crystalline orientations and band-gaps of pulsed laser deposited AlN / (0001) sapphire thin films, J. Crystal Growth, 304, 2007, 257–263.
  21. Jejurikar S. M., Koinkar P. M., More M. A., Joag D. S., Adhi K. P., Kukreja L. M., Field emission studies of nano structured c-axis oriented GaN film on SiOx / Si(100) by pulsed laser deposition, Solid State Communications, 144 (7-8), 2007, 296 – 299.

2006

  1. Sundar M., Nath A.K., Bandyopadhyay D. K., Chaudhuri S. P., Dey P. K., Misra D., Rao T.B.
    Design and performance evaluation of a supersonic nozzle used for laser cutting of thick carbon steel, The International Journal for Manufacturing Science and Production, 7(3-4), 2006.
  2. Ramamoorthy K., Sanjeeviraja C., Jayachandran M., Sankarnarayanan K., Misra P., Kukreja, L. M., Development of a novel high optical quality ZnO thin films by PLD for III-V opto-electronic devices, Current Applied Physics, 6(1), 2006, 103-108.
  3. Late D. J., More M. A, Joag D. S., Misra P., Singh B. N., Kukreja L. M., Field emission studies on well adhered pulsed laser deposited LaB6 film on W tip, Applied Physics Letters, 89, 2006, 123510-1-3.
  4. Mudali U. K, Kaul R., Ningshen S., Ganesh P., Nath A. K., Khatak H. S., Raj B., Influence of laser surface alloying with chromium and nickel on corrosion resistance of type 304L stainless steel, Materials, Science & Technology, 22(10), 2006, 1185-1192.
  5. Paul C. P., Jain A., Ganesh P., Negi J., Nath A. K., Laser Rapid Manufacturing of Colmonoy Components, Optics and Lasers in Engineering, 44(10), 2006, 1096-1109.
  6. Kumar H., Ganesh P., Kaul R., Rao B. T., Tiwari P., Brajpuriya R., Chaudhuri S.M., Nath A. K., Laser welding of 3 mm thick laser-cut AISI 304 stainless steel sheet, Journal of Materials Engineering and Performance, 15(1), 2006, 23-31.
  7. Misra P., Sharma T. K., Porwal S., Kukreja L. M., Room temperature photoluminescence from ZnO quantum wells grown on (0001) sapphire using buffer assisted pulsed laser deposition, Applied Physics Letters, 89(16), 2006, 161912-1-3.
  8. Jejurikar S. M., Banpurkar A. G., Limaye A. V., Date S. K., Patil S. I., Adhi K .P., Misra P., Kukreja L. M., Bathe R., Structural, Morphological and Electrical Characterization of Hetroepitaxial ZnO Thin Films Deposited on Si (100) by Pulsed Laser Deposition: Effect of Annealing (8000 C) in air, Journal of Applied Physics, 99(14907), 2006, 1-7.
  9. Manekar M. A., Chattopadhyay M. K., Kaul R., Pecharsky V. K., Gschneidner K. A., Training effects in Gd5Ge4: role of microstructure, Journal of Physics: Condensed Matter, 18(26), 2006, 6017-6032.

2005 

  1. Mavani K. R., Rana D. S. Malik S. K., Markna J. H., Parmar R. N., Kuberkar. D. G., Misra P., Kukreja L.M., Kndaliya D. C., Growth-parameters-dependent magnetoresistance in pulsed-laser-deposited(La0.5Pr0.2) Ba0.3MnO3 thin films, Journal of Applied Physics, 98(8), 2005, 86111: 1-3.
  2. Nath A. K., Raghu T., Paul C. P., Ittoop M. O., Bhargava P., High-power transverse flow cw co2 laser for material processing applications, Optics & Laser Technology, 37, 2005,  329-33.
  3. Ramamoorthy K., Sanjeeviraja C., Jayachandran M., Sankaranarayanan K., Ganesan V., Misra P., Kukreja L. M., A novel nano-architecture for ZnO thin films on <100> Si, GaAs and InP single crystal wafers by L-MBE as value in nano-robotic device fabrication efforts, Materials Science in Semiconductor Processing, 8(4), 2005, 555-563.
  4. Misra P., Kukreja L. M., Buffer-assisted low temperature growth of high crystalline quality ZnO films using pulsed laser deposition, Thin Solid Films, 485(1-2), 2005, 42-46.
  5. Kaul R., Ganesh P., Tiwari P., Nandedkar R. V., Nath A. K., Characterization of dry sliding wear resistance of laser surface hardened En 8 steel, Journal of Materials Processing Technology, 167, 2005, 83-90.
  6. Sankar P. R., Khattak B. Q., Jain A.K., Kaul R., Ganesh P., Nath A. K., Tiwari P., Amban A. K., Pagare A., Electroforming of Copper by the periodic reversal process, Surface Engineering, 21(3), 2005, 204-208.
  7. Nath A. K., Raghu T., Paul C.P., Ittoop M. O., Bhargava P., High-power transverse flow CW CO2 laser for material processing applications, Optics and Laser Technology, 37(4), 2005, 329-335.
  8. Rao B. T., Kaul R., Tiwari P., Nath A. K., Inert gas cutting of titanium sheet with pulsed mode co2 laser, Optics and Lasers in Engineering, 43(12), 2005, 1330-1348.
  9. Majumdar S., Sharma V. K., Manekar M. A., Kaul R., Sokhey K. J., Roy S. B., Chaddah P., Magnetic and martensitic transitions in Ni-Fe-Ga alloy, Solid State Communications, 136(2), 2005, 85-88.
  10. Kaul R., Ganesh P., Nath A. K., Microstructural characterization of dissimilar laser weld between austenitic and ferritic stainless steel, Journal of Laser Applications, 17(1), 2005, 21-29.
  11. Singh R., Paily R., Dasgupta A., DasGupta N., Misra P., Kukreja L. M., Optimized dual temperature pulsed laser deposition of TiO2 to realize MTOS (Metal-TiO2-SiO2-Si) capacitor with ultrathin gate dielectric, Semiconductor Science and Technology, 20, 2005, 38-43.
  12. Rao B. T., Kumar H., Nath A. K., Processing of concretes with a high power CO2 laser,
    Optics and Laser Technology, 37(5), 2005, 348-356.
  13. Gupta M., Gupta A., Kukreja L. M., Misra P., Rajgopalan S., Balamurgan A. K., Tyagi A. K., Self-diffusion of iron in nano-crystalline iron nitride, Material Science Forum, 480-481, 2005, 557-564.

2004

  1. Misra P., Sahoo P. K., Tiwari P., Kulkarni V. N., Nandedkar R. V., Kukreja L. M., Sequential Pulsed Laser Deposition of CdxZn1-xO Alloy Thin Films for Engineering ZnO Band-gap, Applied Physics A, 78(1), 2004, 37-40.
  2. Kukreja L. M., Rohlfing A., Misra P., Hillenkamp F., Dreisewerd K., Cluster formation in UV laser ablation plumes of ZnSe and ZnO studied by time-of-flight mass spectrometry, Applied Physics A, 78(5), 2004, 641-645.
  3. Paily R., Dasgupta A., Dasgupta N., Ganguli T., Kukreja L. M., Effect of oxygen pressure during pulsed laser deposition of TiO2 on the MTOS (Metal-TiO2-SiO2-Si) capacitor Characteristics, Thin Solid Films, 57, 2004, 462-463.
  4. Bhargava P., Kumar M., Kumar H., Pandit P., Pandey R., Nath A. K., Impulse coupling in laser driven microtargets, Pramana: Journal of Physics, 62(4), 2004, 923-932.
  5. Majumdar J. D., Chandra B. R., Nath A. K., Kaul R., Manna I., Studies on wear and erosion properties in laser composite surfaced aluminum with silicon carbide and alumina, Transactions of the Indian Institute of Metals, 57(5), 2004, A71.
  6. Kukreja L. M., Barik S., Misra P., Variable band gap ZnO nanostructures grown by pulsed laser deposition, Journal of Crystal Growth, 268(3-4), 2004, 531-535.
  7. Ramamoorthy K., Sanjeeviraja C., Jeyachandran M., Sankaranarayanan K., Misra P., Kukreja L. M., Epitaxial lattice matching between epi-n-IZO thin films and <100> Si, GaAs and InP wafers with out any buffer layers by L-MBE technique: a novel development for III-V opto - electronic devices, Material Chemistry and Physics, 84, 2004, 14-19.
  8. Ramamoorthy K., Jayachandran M., Sankaranarayanan K., Misra P., Kukreja L. M., Sanjeeviraja C., Development of novel high speed (electron-mobility) epi-n-ZnO thin films by L-MBE for III-V opto-electronic devices, Current Applied Physics, 4, 2004, 679-684.
  9. Ramamoorthy K., Jayachandran M., Sankaranarayanan K., Misra P., Kukreja L. M., Sanjeeviraja C., Epi-n-IZO / <100> Si, GaAs and InP by L-MBE: A novel feasibility study for SIS type solar cells, Solar Energy, 77, 2004, 193-201.
  10. Singh R., Paily R., Dasgupta A., Dasgupta N., Misra P., Kukreja L. M., Laser-induced oxidation for growth of ultrathin gate oxide, Electronics Letters, 40(25), 2004, 1 – 2.

2003

  1. Ghosh N., Gupta P. K., Patel H. S., Jain B., Singh B. N., Depolarization of light in tissue phantoms - effect of collection geometry, Optics Communications, 222(1-6), 2003, 93-100.
  2. Kaul R., Ganesh P., Tiwari P., Nandedkar R. V., Nath A. K., Comparison of laser and gas tungsten arc weldments of stabilized 17 wt% Cr ferritic stainless steel, Materials and Manufacturing Processes, 18(4), 2003, 563-580.
  3. Sheth S.S., Choudhary P., Nath A. K., Computer Numerical control system for two axes laser work-station, IETE Journal of Research, 49(1), 2003, 59-66,.
  4. Ghosh N., Gupta P. K., Patel H. S., Jain B., Singh B .N., Depolarization of light in tissue phantoms - effect of collection geometry, Optics Communications, 222, 2003, 93-100.
  5. Kaul R., Ganesh P., Albert S. K., Jaiswal A., Lalla N. P., Gupta A., Paul C. P., Nath A. K., Laser cladding of austenitic stainless steel with nickel base hardfacing alloy, Surface Engineering, 19(4), 2003, 269-273.
  6. Sokhey K. J., Manekar M. A., Chattopadhyay M. K., Kaul R., Roy S. B., Chaddah P., Magnetic and transport properties of (β+γ) Ni35Co35Al30 alloy across the martensitic transition, Journal of Physics D: Applied Physics, 36, 2003, 1366-1370.
  7. Kumar M., Deshpande A., Gupta C., Biswas A. K., Nath A. K., Maximization of yield of C13 isotope by multiphoton dissociation of freon-22 for macroscopic production of 13C isotope using high average power TEA CO2 laser, Proceedings of Indian Academy of Sciences: Chemical Sciences, 114, 2003, 659-673.
  8. Khare J., Sridhar R., Paul C. P., Raghu T., Nath A. K., Operational characteristics and power scaling of a transverse flow transversely excited CW CO2 laser, Pramana, 60(1), 2003, 99-107.
  9. Kumar M., Deshpande A., Gupta C., Nath A. K., Yield and enrichment studies of C-13 isotope by multi-photon dissociation of freon-22 at low temperatures, Proceedings of Indian Academy of Sciences: Chemical Sciences, 115(3), 2003, 219-224.
  10. Roy U. N., Kukreja L. M., Oriented Growth of CdS Nanoparticulate films with constant average particle size with thickness up to 1 micrometer, J. Crys. Growth, 250, 2003, 405-408.
  11. Barik S., Srivastava A. K., Misra P., Nandedkar R. V., Kukreja L. M., Alumina capped  zno quantum  dots  multilayer grown by pulsed laser deposition,  Solid State Communications, 127, 2003, 463-  467.
  12. Ramamoorthy K., Sanjeeviraja C., Jayachandran M., Misra P., Kukreja L. M.,  Epi-n-ZnO / <100> Si, GaAs and InP  by L-MBE technique: A novel development for III-V opto-electronic devices, Mat. Sci. in Semiconductor Processing, 6, 2003, 219 – 224.
  13. Rohlfing A., Menzel C., Kukreja L. M., Hillenkamp F., Dreisewerd K., Photoacoustic analysis of matrix-assisted laser desorption/ionization processes with pulsed infrared lasers, J. Phys. Chem B, 107, 2003, 12275 – 12286.

2002

  1. Kaul R., Ganesh P., Nath A. K., Tiwari P., Nandedkar R. V., Characterization and comparison of laser and gas tungsten arc weldments of aisi stainless steel, Metals Materials and Processes, 14(1), 2002, 41.
  2. Kaul R., Ganesh P., Tiwari M. K., Singh A. K., Tiwari P., Gupta A., Nath A. K., Laser-assisted deposition of graded overlay of stellite 6 on austenitic stainless steel, Lasers in Engineering, 12(3), 2002, 207-225.
  3. Nath A. K., Sridhar R., Ganesh P., Kaul R., Laser power coupling efficiency in conduction and keyhole welding of austenitic stainless steel, Sadhana, 27(3), 2002, 383-392, 2002.
  4. Kumar M., Deshpande A., Gupta C., Biswas A. K., Nath A. K., Maximization of yield of C13 isotope by multi-photon dissociation of freon-22 using high average power TEA CO2 laser, Asian Journal of Photochemistry, 114, 2002, 659.
  5. Rao B.  T., Nath A. K., Melt flow characteristics in gas assisted laser cutting, Sadhana, 27, 2002, 569-575.
  6. Kaul R., Ganesh P., Ittoop M. O., Nath A. K., Kumar A., Bhatt R. B., Kumar A., Microstructural characterization of a dissimilar weld of alloy d9 and 316m stainless steel produced using a 2.5 kW CW CO2 laser, Lasers in Engineering, 12(2), 2002, 17-33.
  7. Bhattacharya P., Sharma T. K., Singh S., Ingale A. A., Kukreja L. M., Observation of zinc blend phase in InN thin films grown on sapphire by nitrogen plasma assisted pulsed laser deposition, Journal of Crystal Growth, 236(5), 2002.
  8. Rao T. B., Sinha R.K., Nath A. K., Optimization of Si-steel cutting with CO2 laser, Metals Materials and Processes, 14(2), 2002, 145-154.
  9. Paul C. P., Negi J., Nath A. K., Parametric dependence and fabrication time in laser rapid manufacturing, Metals Materials and Processes, 14(2), 2002, 163-172.
  10. Roy P., Dasgupta A., Dasgupta N., Bhattacharya P., Misra P., Ganguli T., Kukreja L. M., Balamurugan A. K., Rajagopalan S., Tyagi A. K., Pulsed laser deposition of TiO2 for MOS gate dielectric, Applied Surface Science, 187, 2002, 297.
  11. Ganguli T., Kumar S., Kukreja L. M., Rustagi K. C., Surface photovoltage spectroscopic study of undoped ZnSe/n+GaAs grown by Pulsed laser Deposition, Journal of Physics: Condensed Matter, 14, 2002, 1813.
  12. Paily R., Dasgupta A., Dasgupta N., Bhattacharya P., Misra P., Ganguli T., Kukreja L. M., Balamurugan A. K, Rajagopalan S., Tyagi A., Pulsed Laser Deposition of TiO2 for MTOS Gate Dielectric , Appl. Surf. Sci., 187, 2002, 300-307.

 

 

FeedBack  |  Disclaimer  |  Hyperlinking Policy  |  Copyright Policy  |  Privacy Policy  |  Accessibility Statement |  Contact Us  |  Site Map

Site Owned by Raja Ramanna Centre for Advanced Technology (RRCAT), Designed, Maintained by Web Team and Hosted by Computer Centre, RRCAT

Best viewed in 1024x768 resolution